![]() The cable length is listed at the end of the Description field in the product’s Ordering information. If a sensor does not have an –L or other –LX designation after the main model number, the sensor has a set cable length. An –LQ model has a user-specified cable length for connection to a RAWS-P weather station.An –LC model has a user-specified cable length for connection to an ET107, CS110, or retired Metdata1.If a sensor is listed as an –LX model (where “X” is some other character), that sensor’s cable has a user-specified length, but it terminates with a specific connector for a unique system: Most Campbell Scientific sensors are available as an –L, which indicates a user-specified cable length. P2546D-L Three-Cup Anemometer with MEASNET Calibration (electronic version) 50° to +50☌ (assumes non-riming conditions) 50° to +70☌ (assumes non-riming conditions) WINDSONIC1-L 2-D Sonic Wind Sensor with RS-232 Output Wind Speed: ☐.2 m/s (☐.4 mph) or 1% of reading.Wind Direction: 0.5 m/s (1.0 mph) at 10° displacement.Wind Direction: 1.0 m/s (2.2 mph) at 10° displacementĠ5108-45-L Wind Monitor-HD, Alpine Version.50° to +60☌ (assuming non-riming conditions) Wind Speed (Anemometer): ☐.5 m/s (1.1 mph).Wind Direction (Vane): 1.8 m/s (4 mph) with 5° displacement.Wind Direction (Vane): 0.8 m/s (1.8 mph) with 10° displacement.Wind Speed (Anemometer): 0.5 m/s (1.1 mph).WINDSONIC4-L 2-D Sonic Wind Sensor with SDI-12 Output 40 to +50☌ (equivalent to 305 to 368 m s -1 in speed of sound)ĬSAT3BH Heated, 3-D Sonic Anemometer with Integrated Electronics Wind Speed: ☐.3 m/s (☐.6 mph) or 1% of readingĬSAT3B 3-D Sonic Anemometer with Integrated Electronics.Wind Direction: 1.1 m/s (2.4 mph) at 10° displacement.50° to +50☌ (assuming non-riming conditions)
0 Comments
Leave a Reply. |